The Yocan Kodo Pro is a compact 510-threaded vaporizer designed for use with compatible cartridges. Its small size, digital controls, and practical features make it a popular option among users who want a simple, portable device.
This guide serves as a clear Yocan Kodo Pro manual, explaining the device’s main functions, key features, and step-by-step setup so you can operate it confidently and maintain it properly.
Below, we outline how to use the Yocan Kodo Pro, what makes it a convenient option, and how to navigate its controls for reliable day-to-day performance.
Jump to section
- Unboxing Your Yocan Kodo Pro: What's Inside?
- Yocan Kodo Pro Key Features
- Using Your Yocan Kodo Pro: Step-by-Step Guide
- Charging and Battery Life
- Important Warnings and Precautions
- Troubleshooting Common Issues
- Conclusion
- Frequently Asked Questions
Unboxing Your Yocan Kodo Pro: What's Inside?
When you first unbox your Yocan Kodo Pro, you will find the vaporizer unit itself. It's important to note that a USB-C charging cable and a 510-thread cartridge are not included, so you will need to have your own.
Yocan Kodo Pro Key Features
The Yocan Kodo Pro includes several functional features that distinguish it from other compact 510-threaded devices:
OLED Display
A clear display screen shows essential information such as selected voltage, puff counter, preheat status, and battery level.
Variable Voltage Control
The adjustable voltage range of 1.8V to 4.2V allows users to modify settings in 0.1V increments for precise control over cartridge heating.
10-Second Preheat Function
The built-in preheat option warms the cartridge at 1.8V for 10 seconds. This feature can help loosen thick oils and support consistent heating.
Puff Counter
The on-screen puff counter tracks usage and can be reset manually at any time.
Compact and Portable Design
Designed to fit comfortably in the hand, the Kodo Pro’s small size makes it easy to store, carry, and transport discreetly.
Universal 510 Threading
The standard 510 connection is compatible with most industry-standard oil cartridges, offering broad versatility.
Using Your Yocan Kodo Pro: Step-by-Step Guide
Getting started with the Yocan Kodo Pro is straightforward. Follow these steps to set up and operate your device:
1. Turn the Device On/Off
Press the power button five times rapidly to switch the device on or off.
2. Attach the Cartridge
Gently screw in your 510-threaded cartridge until secure. Avoid overtightening to prevent damage to the threading.
3. Adjust the Voltage
Use the “+” and “–” buttons to set the desired voltage level. Voltage can be adjusted in 0.1V increments between 1.8V and 4.2V, depending on the heating requirements of your cartridge.
4. Preheat (Optional)
Press the power button twice to activate the 10-second preheat cycle at 1.8V.
To stop the preheat early, press the button two times again.
5. Activate Heating
Press and hold the power button to heat the cartridge while inhaling.
For safety, the device automatically stops after 15 seconds of continuous activation.
6. Reset the Puff Counter
Press the power button and the “–” button simultaneously to reset the puff counter.
Charging and Battery Life
The Yocan Kodo Pro is equipped with a 400mAh battery and charges via a USB-C cable. This allows for straightforward and efficient recharging. The OLED display includes a battery icon that shows the current charge level, making it easy to determine when the device needs to be plugged in.
Important Warnings and Precautions
The Yocan Kodo Pro includes several built-in safety protections. When the device detects an issue, it will display a message on the OLED screen and adjust operation accordingly:
Over-Time Protection
If the power button is held for more than 15 seconds, the device will stop heating and display “Over Time.”
No Cartridge Warning
If no cartridge is attached or detected, the screen will show “No Atomizer.”
Short Circuit Warning
If the device detects a short circuit, it will stop functioning temporarily and display “Short-circuit.”
Low Battery Warning
When the battery charge is too low for operation, the screen will display “Low Battery.”
Troubleshooting Common Issues
If your Yocan Kodo Pro is not operating as expected, the following steps may help resolve common issues:
“No Atomizer” Warning
Check that the cartridge is properly attached. Ensure the contact points on both the cartridge and the device are clean and free of debris.
“Short-Circuit” Warning
This message may indicate an issue with the cartridge. Try attaching a different 510-threaded cartridge to determine whether the problem persists.
Low Output or Limited Heating
If the device is heating but the output seems minimal, the voltage setting may be too low for the cartridge being used. Increase the voltage gradually in small increments.
Running the optional preheat cycle may also help warm thicker oils.
Device Not Activating
Confirm that the device is turned on by pressing the power button five times quickly.
Ensure the battery is charged and that a “No Atomizer” warning is not displayed.
Conclusion
The Yocan Kodo Pro combines a compact design, an OLED display, and built-in safety features to offer a straightforward and reliable 510-threaded device. This Yocan Kodo Pro manual has covered the essential functions—charging, adjusting voltage, using the preheat option, and troubleshooting, so you can operate the device with confidence.
If you were looking for clear guidance on how to use the Yocan Kodo Pro, the steps are simple: turn on the device, attach a compatible cartridge, select your voltage, and follow proper usage and maintenance practices. Its small size and practical controls make it suitable for users who want an easy-to-handle vaporizer with clear operational feedback.
You Might Also Like
Frequently Asked Questions
Where to Buy Yocan Kodo Pro in Canada
You can purchase the Yocan Kodo Pro here directly from the Smoke & Vape website. As an authorized retailer based in Canada, we offer shipping across the country.
How to Reset the Puff Counter on Yocan Kodo Pro
To manually reset the puff counter on your Yocan Kodo Pro, press the power button and the left (-) button at the same time. The counter will also automatically reset to zero after it reaches 9999 puffs.
How to Reset Yocan Kodo Pro
To perform a factory reset on your Yocan Kodo Pro, follow these steps:
-
Press and hold the power button for 5 seconds until the device shuts down.
- Press and hold the power button again for 5 seconds until the device turns back on.
How to Turn On Yocan Kodo Pro
To turn on your Yocan Kodo Pro, press the power button 5 times quickly. The OLED screen will light up, indicating that the device is on.
How to Clean Yocan Kodo Pro
To ensure the best performance and longevity of your Yocan Kodo Pro, regular cleaning is recommended. Here's how to clean the different parts of your device:
Device Body: * Use a soft, dry cloth to wipe down the exterior of the device. For tougher grime, you can use a cloth slightly dampened with water and a mild soap solution.
510 Connection: * It's important to keep the 510-threading clean to ensure a good connection with your cartridges.
- Use a cotton swab lightly dipped in isopropyl alcohol to clean the threading and contact point.
- Make sure the area is completely dry before attaching a cartridge.
Charging Port: * Gently clean the USB-C charging port with a dry, soft brush or a toothpick to remove any dust or debris.
Important Note: Never submerge your Yocan Kodo Pro in water or any other liquid.
Why Does My Yocan Kodo Pro Say "Shorted"?
If your Yocan Kodo Pro displays a "shorted" message, it indicates an electrical short in the connection between the battery and the cartridge. This is a safety feature to prevent damage to the device. Here are some common causes and troubleshooting steps:
- Poor Connection: The cartridge may not be screwed in properly. Try unscrewing the cartridge and then screwing it back in, ensuring it's snug but not overly tight.
- Dirty Connection: Residue on the 510-threading of the battery or the cartridge can interfere with the connection. Clean both contact points with a cotton swab and isopropyl alcohol.
- Faulty Cartridge: The issue might be with the cartridge itself. Try using a different cartridge to see if the problem persists.
- Device Malfunction: In rare cases, there might be an issue with the device's internal wiring.
If you've tried the troubleshooting steps above and the "shorted" message continues to appear, it's best to try a different cartridge to determine if the issue is with the device or the cartridge.
